How do we work together on a project in VIGO6?
When you work together on a project in the early stage, it is faster and simpler to use the shared draft state. Use it for both the project as well…
I have used VIGO5. Is it easy to move to VIGO6?
The programming language in VIGO6, called COPP, is similar to PROCESS-PASCAL, so this part should be no problem. And the VIGO6 platform contains many improvements that will make development easier,…
I am not sure whether I need relay outputs or 1A DC outputs. How do I proceed?
In VIGO6, you do not need to know the specific final design of your outputs or inputs for that matter. You can develop all your control code without deciding which…
Is it possible to predefine users in a VIGO6 project?
While we suggest using the NFC-reader in the PD688 display unit for easy login, you can also predefine users. We have created a control component (PD_17553) and visualization (PD_18202) that…
How do I change the automatically assigned channels?
First, locate your components into devices – which will give you the automatic configuration. The method is that the first output you add gets the first output channel. The first…
Can I work with 0-10V inputs?
While PROCES-DATA has designed the modules for 4-20mA inputs and outputs, it is still possible to use a 0-10V input. Below is an example of a 0-10V level input transforming…
How do we design our VIGO6-program?
Overall design In general, PD recommends creating components for “logical functions”. As an example, please see the below component structure for a milk tanker system. By following this method, you…
How do I change units? I would like to have volume in litres and flowrate in either m3/h or L/min.
Using one of the predefined "Quantity <-> local units relation table" All units in VIGO6 are stored as SI-units but can be displayed as any derived unit you want. Volume…
